古代丫鬟随时上的辣文,1000rtys唯美摄影图片闫盼盼,欧美黑人巨大多p杂交,亚洲成a影院,商务旅行戴女老的戴帽子973,午夜刺激香蕉葡萄榴莲,国产精品小电影在线播放,人与畜禽cropration,色多多午夜福利网站,商务旅行戴女老的戴帽子973,又又刺激的视频网站

YOU98(P) Maintenance Guide

To ensure optimal performance and long-term use of the X-ray machine, as well as to improve work efficiency and ensure operational safety, the following maintenance instructions must be followed.
I. Daily Maintenance
1.1. After using the device, turn off the power and clean/disinfect the surface with 75% alcohol wipes. Do not allow water or other liquids to seep into the interior of the machine to avoid short circuits.
1.2. During X-ray imaging, patients must wear protective gear, and operators or other personnel should maintain a distance of at least 2 meters from the radiation source of the dental X-ray machine.
1.3. When the device is not in use, turn off the standby mode to conserve energy.
1.4. Always operate the device following standard procedures. Do not force shutdown to avoid damaging the battery or circuit board.
II. Regular Maintenance
2.1. If the battery is not used for an extended period, recharge it at least once every three months. Only use the original charger provided with the device, and avoid charging for more than 12 hours in a single session.
III. Precautions for Use
3.1. To prevent accidental operation, the device is equipped with a lock function (press Mode and Teeth buttons simultaneously to unlock).
3.2. Do not place the X-ray machine in a location that makes it difficult to quickly power off or disconnect the device.
3.3. Do not perform maintenance or repair on the device while it is in use with a patient.
IV. Inspection and Accessory Replacement
4.1. Check whether the screen displays normally when the device is powered on.
4.2. Before each use, inspect whether the buttons, buzzer, and indicator lights are functioning properly.
4.3. Regularly inspect the power cord, plug, and socket to ensure proper connection. Prevent issues such as failure to charge, power short circuit, or electric leakage.
V. Protection and Storage
5.1. Prevent electrostatic discharge (ESD) and electromagnetic interference (EMI) from nearby equipment.
5.2. As the product emits a certain le